Commands to check The HP raid array configuration utility

hpacucli controller slot=0 ld all show

Sample output :

Smart Array P420i in Slot 0 (Embedded)

       array A

          logicaldrive 1 (4.6 TB, RAID 5, OK)
         
hpacucli controller slot=0 show config

Sample output :

Smart Array P420i in Slot 0 (Embedded)    (sn: 5001438025C6B000)

   array A (SAS, Unused Space: 0  MB)


      logicaldrive 1 (4.6 TB, RAID 5, Interim Recovery Mode)

      physicaldrive 1I:2:1 (port 1I:box 2:bay 1, SAS, 200 GB, OK)
      physicaldrive 1I:2:2 (port 1I:box 2:bay 2, SAS, 200 GB, OK)
      physicaldrive 1I:2:3 (port 1I:box 2:bay 3, SAS, 600 GB, OK)
      physicaldrive 1I:2:4 (port 1I:box 2:bay 4, SAS, 600 GB, OK)

   unassigned

      physicaldrive 2I:2:5 (port 2I:box 2:bay 5, SAS, 700 GB, OK)